Skip to main content
Miter Cutting and Joining
Moulding and Finishing
Foils and Wrapping Film
News & Events
Picture Framing Machinery
Foot-operated mitering machine
Semiautomatic, pneumatic mitering machine
Fully automatic electric/hydraulic mitering machine
Hand-operated mitering machine with rebate supports and measuring scale for cutting small photo frames and fillets
Morso Model B mitring machine is a small and handy table model, designed for glass mouldings and similar, which can be cut once.
Model F Deluxe
Model F + 10 Deluxe
Morso F plus Ten mitring machine cuts double mitre at 45° and single mitre up to 90°.
Again, there is no problems with dust, as all the waste will be lead directly into a bin ( the bin is not delivered with the Morso H ), through the Morso Waste Chute, which is a standard accessory.
Morso Model EH is a fully automatic electric/hydraulic mitring machine for cutting wooden, plastic, and MDF picture mouldings.
Model EH Turbo
Morso Model EHT mitring machine is exactly the same machine as the Morso EH, with the same technical data and working capacities. BUT it is about 50 percent faster than the EH machine.
Model E Future Green
Morso E Future Green is a fully automatic, electric mitring machine with a two-hand release built on. This makes the machine absolutely safe to operate as it is impossible to start the machine and touch the knives at the same time.
Double Miter Saw
Adjustable Angle Double Miter Saw
Electro-pneumatic Back Naile
Auto gluing and stapling
Manual sawing machine, with pneumatic horizontal stroke for "V-cutting" at 45 degrees at both ends, in mouldings of any shape and kind.
Manual sawing machine, with horizontal stroke, for "V-cutting" at 45 degrees, at both ends, in wooden mouldings of any shape and kind (all woods-aluminium covered, etc.).
Sawing machine, with vertical pneumatic stroke, for "V-cutting" at 45° degrees, at both ends, in wooden and plastic mouldings of any shape and kind.
Pneumatic joining top table machine for the assembly of any shape and kind of frames either with four, six or eight sides, even curves.
Pneumatic joining machine with manual shifting or the loader for any kind and shape of frames, either with four sides.
Electropneumatic joining machine for the assembly of any shape and kind of frames either with four, six or eight sides.
Electro-pneumatic joining machine with automatic cycle for clamping and inserting conic steel nails, available in coils and in different sizes according to the height of the mouldings.
Electro-pneumatic joining-gluing machine with automatic cycle for assembly of any shape and kind of square, hexagonal, octagonal, and dodecagonal frames.